Skip to content

Exchange Plates

Configure Worktable

In this step the sample plate configuration to be used by the system is defined.

Initially, a summary of the currently configured plates is shown. Press Change to modify the configuration or to exchange plates.

Screenshot

The buttons To Left port and To Right port move the stage to the corresponding loading positions and temporarily disable the Y axis. A disabled axis can be manually moved around without disengaging and needing to re-initialize the positioning system.

Once the correct container from the list of available plates is selected, content heights can be adjusted by directly clicking on the parameters. The chosen heights determine the motion profiles of the system and, if set appropriately, can save significant amounts of time during the experiment.

Holder input

Sample input